Injectable HA Moisturizer Treatment in Singapore
An injectable skin booster designed to hydrate, firm, and remodel skin from within — with minimal downtime and no added volume.
Key highlights:
- Skin Hydration
- Collagen Stimulation
- Minimal Downtime
- Doctor-Administered
Injectable HA Moisturizer Treatment in Singapore
Injectable HA Moisturizer is an injectable skin booster containing concentrations of pure hyaluronic acid available — 32 mg per 2 ml syringe — designed to improve skin quality through a process called bioremodelling.
The Science Behind Injectable HA Moisturizer
Cooperative Hybrid Complexes of Hyaluronic Acid (HA)
Injectable skin remodelling treatment that targets beyond the skin’s surface layers to stimulate hydrating and skin tightening results.
Developed in Italy by IBSA Farmaceutici, Injectable HA Moisturizer has gained traction in Singapore since its introduction. It is made with patented NAHYCO® technology — a thermal bonding process that creates pure hybrid cooperative complexes of hyaluronic acid (HA), without the use of chemical cross-linking agents (BDDE-free).
4,500+ Injectable HA Moisturizer treatments performed by aesthetic doctors in Singapore since its debut
1,000,000+ Treatments performed internationally by end of 2019, according to Neoasia
Bioremodelling
Injectable HA Moisturizer does not add volume or reshape facial features. It works by distributing hyaluronic acid evenly beneath the skin to improve texture and hydration from within.
Bioremodelling
The combination of low molecular weight HA (L-HA) and high molecular weight HA (H-HA) is designed to stimulate the production of collagen and elastin — the structural proteins responsible for skin firmness and elasticity.
Pure & Biocompatible
Formulated with no BDDE chemical cross-linkers, parabens, or preservatives. Hyaluronic acid occurs naturally in the body, making Injectable HA Moisturizer biocompatible.
Note: Unlike conventional dermal fillers, Injectable HA Moisturizer is intended for those seeking an improvement in overall skin quality — hydration, tone, and texture — rather than structural changes or volume enhancement.
How Does Injectable HA Moisturizer Work?
Injectable HA Moisturizer contains two molecular forms of hyaluronic acid — low molecular weight (L-HA) and high molecular weight (H-HA) — thermally bonded without chemical agents. This allows the product to spread gradually within the deeper layers of skin, initiating a process of bioremodelling.
Step 01. Injection via BAP Technique
The product is administered at 10 specific Bio Aesthetic Points — 5 on each side of the face — carefully mapped to avoid major blood vessels and nerve pathways, reducing the risk of bruising.
Step 02. Spreading & Integration
Unlike traditional fillers that stay localised, Injectable HA Moisturizer spreads naturally within the skin’s deeper layers, covering a wider treatment zone from just 10 injection points.
Step 03. Collagen & Elastin Stimulation
The HA interaction with surrounding cells is designed to stimulate multiple types of collagen and elastin — supporting skin structure and firmness over time.
Step 04. Gradual Skin Improvement
As the bioremodelling process progresses, skin may appear hydrated, supple, and firm. Improvements typically develop over 4–6 weeks following each session.
Treatment at a Glance
Product | Injectable HA Moisturizer by IBSA Farmaceutici |
HA Concentration | 32 mg per 2 ml syringe |
Injection Points | 10 BAP points (5 per side) |
Session Duration | Approximately 20–30 minutes |
Sessions Recommended | 2 sessions, spaced 4 weeks apart |
Duration of Effect | May last 6–12 months* |
Downtime | Minimal — small bumps for 24–48 hours |
Numbing | Topical cream applied before treatment |
Administered by | Qualified Medical Doctor |
* Duration of effect varies between individuals and is not guaranteed.
The BAP Technique
The Bio Aesthetic Points technique uses only 10 injection sites on the face — selected to avoid major vessels and nerves. This allows for even product distribution, reduced bruising risk, and a comfortable treatment experience compared to whole-face injection methods.
Where Can Injectable HA Moisturizer Be Administered?
Injectable HA Moisturizer may be used on several areas of the face. Suitability for each area is assessed by our doctor during consultation.
Face
The face is the most commonly treated area. Injectable HA Moisturizer is typically administered to the mid and lower face — including the cheeks, smile-line region, and jawline — using the standard BAP technique with 10 injection points.
It is designed to improve overall skin hydration, elasticity, and texture across the treated zone. It does not target specific folds or add structural volume, making it suitable for those seeking a natural improvement in skin quality rather than a change in facial shape.
Treatment is typically completed within 20–30 minutes including numbing time. Small injection bumps are common and generally resolve within 24–48 hours.
Neck
The neck is often one of the first areas to show visible signs of skin ageing — including crepiness, fine lines, and reduced firmness. The skin here is typically thinner and delicate than the face.
Injectable HA Moisturizer can be administered to the neck using a modified BAP technique with 10 specific injection points designed for neck anatomy. The product’s ability to spread within the skin makes it well-suited for this larger surface area. A medical assessment is required to confirm suitability.
Hands
The backs of the hands can show signs of skin ageing such as thinning and reduced skin smoothness. Injectable HA Moisturizer may be used in this area to improve skin hydration and texture over time. Treatment does not alter the structure or shape of the hand and is intended solely for skin quality improvement.
All treatment areas are subject to clinical assessment. Your doctor will confirm suitability before any treatment begins.
Potential Benefits of Injectable HA Moisturizer
Results can vary between individuals. The following are commonly observed outcomes based on clinical experience with Injectable HA Moisturizer bioremodelling.
Improved Skin Hydration
Hyaluronic acid is a natural humectant. Injectable HA Moisturizer may help restore deeper skin hydration, contributing to a supple and refreshed appearance.
Skin Firmness and Tone
By stimulating collagen and elastin, the treatment may support skin structure. This can help improve the appearance of mild skin laxity over time.
Reduction in Fine Lines
As skin becomes better hydrated and structural support improves, the appearance of fine lines and surface wrinkles may be reduced.
Overall Skin Quality
Many patients notice an improvement in skin texture, radiance, and smoothness following a full course of Injectable HA Moisturizer treatment.
Injectable HA Moisturizer vs Other Injectable Skin Boosters
Understanding how Injectable HA Moisturizer differs from other skin-quality injectables may help you have an informed discussion with your doctor.
Feature | Injectable HA Moisturizer | PDRN / Polynucleotide | HA Skinbooster |
Primary Mechanism | Bioremodelling via L-HA & H-HA hybrid | DNA repair & cell regeneration | Direct hydration with cross-linked HA |
Main Concern | Skin laxity, hydration, overall quality | Skin repair, acne scarring, dull skin | Dehydration, dullness, radiance |
Injection Sites (Face) | 10 (BAP technique) | Multiple — whole-face | Multiple — whole-face |
Adds Volume? | No | No | Mild |
Typical Sessions | 2 sessions, 4 weeks apart | 3–4 sessions, monthly | 2–3 sessions, monthly |
Downtime | Minimal (24–48 hrs bumps) | Minimal (mild redness) | Minimal (mild swelling) |
This table is for general educational purposes. Your doctor will recommend the most appropriate treatment following a personal assessment.
Who May Be Suitable for Injectable HA Moisturizer?
There is no fixed age requirement. A consultation with our doctor is the appropriate way to determine whether Injectable HA Moisturizer suits your skin condition and goals.
Injectable HA Moisturizer may be considered for:
- Individuals noticing early signs of reduced skin elasticity or firmness
- Those with dry, dehydrated, or dull-looking skin
- Patients with mild skin laxity who prefer a non-volumising treatment
- Those in their late 20s to 50s seeking a preventative or maintenance approach
- Individuals who prefer minimal downtime and a natural-looking improvement
- Patients assessed as medically appropriate by a qualified doctor
Injectable HA Moisturizer is not suitable for:
- Individuals who are pregnant or breastfeeding
- Those with a known allergy to hyaluronic acid
- Patients with active skin infections or open wounds in the treatment area
- Those with certain autoimmune or blood-clotting conditions (assessed individually)
- Anyone under 18 years of age
- Anyone who has not completed a medical consultation with a qualified doctor
When to Start
The right time depends on your individual skin condition and goals. A consultation with our doctor is the most appropriate way to determine whether Injectable HA Moisturizer is suitable for you, and if so, when to begin.
Injectable HA Moisturizer Treatment: What to Expect & Steps Involved
Initial treatment begins with a consultation where you will meet with your aesthetic doctor. Make sure to discuss your goals and concerns. The standard Injectable HA Moisturizer protocol involves two sessions.
Step 01. Initial Consultation
Our doctor assesses your skin condition, reviews your medical history, and discusses your goals. This is the time to ask questions and confirm whether Injectable HA Moisturizer is appropriate for you.
Step 02. Cleansing & Numbing
The treatment area is cleansed and a topical numbing cream is applied approximately 20–30 minutes before injection to minimise discomfort.
Step 03. The Injection (BAP Technique)
Injectable HA Moisturizer is injected at the 10 Bio Aesthetic Points on the face. The doctor will evaluate the result after each injection. The procedure typically takes 15–20 minutes.
Step 04. Clean-Up & Recovery
Small bumps at injection sites are normal and resolve within 24–48 hours. You will receive post-treatment care instructions before leaving the clinic. Make sure to follow aftercare instructions.
Step 05. Second Session (4 Weeks Later)
The second session reinforces the bioremodelling process. After completing the initial two-session course, maintenance sessions may be recommended every 6 months.
Aftercare Guidelines
- Avoid touching or massaging the treated area for 24 hours
- Refrain from wearing makeup for 12 hours
- Avoid saunas, steam rooms, or vigorous exercise for 48 hours
- Use gentle, fragrance-free skincare for the first week
- Apply broad-spectrum SPF 30+ sunscreen daily
- Contact the clinic if you experience persistent swelling, unusual pain, or other concerns
Can Injectable HA Moisturizer Be Combined with Other Treatments?
Injectable HA Moisturizer may be combined with other treatments to address concerns not covered by bioremodelling alone. These may include:
- Botulinum toxin — for dynamic wrinkles and muscle-related lines
- Dermal fillers — for volume restoration or facial contouring
- HIFU — for deeper tissue tightening
- Laser treatments — for pigmentation or skin renewal
- PDRN / Polynucleotides — for skin repair and texture improvement
Your doctor will advise on which combination, if any, is appropriate based on your individual skin assessment.
.
Cost of Injectable HA Moisturizer in Singapore
In compliance with the Healthcare Services Act (HCSA), specific pricing for our medical services cannot be displayed online. For detailed pricing information, please contact us directly or enquire during your consultation.
Dr. Ng Hong Yi
MOH-Accredited Aesthetic Doctor
- Appointed Trainer, Allergan Medical Institute
- MOH-Accredited Aesthetic Doctor
- Bachelor of Medicine, Bachelor of Surgery (MBBS), Yong Loo Lin School of Medicine, NUS (2007)
- Practising aesthetic medicine since 2012, with a focus on injectables including skin boosters and bioremodelling treatments
Dr. Ng Hong Yi is an MOH-accredited aesthetic doctor with a practice guided by a commitment to medical ethics, patient safety, and the use of regulated products. He is a faculty member and appointed trainer for the Allergan Medical Institute, where he instructs other medical professionals on injectable techniques.
His approach to Injectable HA Moisturizer treatment emphasises proper clinical assessment, authentic product use, and setting realistic expectations for each patient — ensuring that outcomes are appropriate and that treatment decisions are medically sound.
Why Choose Zion Aesthetics?
Zion Aesthetics has earned the Allergan Aesthetic Diamond Award (2024), the Facial Aesthetics Platinum Award (2023), and the AMI Trainer Award (2023) — recognitions that reflect delivery of safe, natural outcomes.
Doctor’s Experience
Dr. Ng is a faculty member of the Allergan Medical Institute and trains other doctors in injectable techniques. His background in bioremodelling treatments supports careful, clinically sound administration.
Conveniently Located
Located at Wisma Atria, Orchard Road, Zion Aesthetics is easily accessible from across Singapore, with flexible appointment scheduling from Monday to Saturday.
Safety & Natural Results
Dr. Ng designs his treatment approach prioritising patient safety, minimising complications, and delivering natural-looking results. Only authenticated, regulated products are used.
Authentic Products Only
We use only verified, authentic Injectable HA Moisturizer sourced through authorised channels. Patients are welcome to ask to see product authentication details at any time before treatment begins.
FAQs
Injectable HA Moisturizer is an injectable skin booster containing 64 mg of pure hyaluronic acid per 2 ml syringe. Unlike dermal fillers — which are designed to add volume, restore facial structure, or reshape contours — Injectable HA Moisturizer does not create volume or define features. Its purpose is bioremodelling: improving overall skin hydration, texture, and firmness by stimulating collagen and elastin production. It is intended for those seeking skin quality improvement, not facial reshaping.
The standard Injectable HA Moisturizer protocol involves two sessions spaced four weeks apart. This two-session course is designed to allow the bioremodelling process to be fully initiated. After the initial course, maintenance sessions may be recommended approximately every six months, depending on how your skin responds and your personal goals.
Results can vary between individuals. Following a standard two-session course, improvements may last approximately 6 to 12 months. Factors such as age, skin condition, lifestyle habits, and the body’s natural rate of HA breakdown can all influence duration. Results are not permanent and are not guaranteed to last a specific duration.
A topical numbing cream is applied before the procedure to minimise discomfort. The injection involves a fine needle and is typically described as brief pressure or a mild pinprick sensation. Because the BAP technique uses only 10 injection points on the face, overall treatment time and discomfort are generally lower than whole-face injection approaches. Pain tolerance varies between individuals.
Injectable HA Moisturizer is associated with minimal downtime. Most patients are able to return to daily activities on the same day. Small injection bumps are typical and usually resolve within 24–48 hours. Minor redness or bruising may also occur. It is advisable to avoid heavy exercise, saunas, and steam rooms for 48 hours, and to refrain from applying makeup for the first 12 hours.
Injectable HA Moisturizer works gradually. Some patients notice an improvement in skin hydration within the first week. More noticeable improvements in skin firmness and texture typically develop around four to six weeks after the second session. The full extent of improvement may continue to develop for up to six to eight weeks post-treatment. Individual results can vary.
Yes. In addition to the face, Injectable HA Moisturizer may be used on the neck, hands, and selected body areas such as the décolletage, upper arms, or abdomen. Neck and face treatments use standardised BAP technique protocols. All treatment areas require a clinical assessment before proceeding.
Authentic Injectable HA Moisturizer (manufactured by IBSA Farmaceutici Italia) comes with verifiable batch numbers, holographic seals, and product authentication systems. At Zion Aesthetics, we use only verified, authentic Injectable HA Moisturizer sourced through authorised channels. Patients are welcome to ask to see the product and authentication details at any time before their treatment.
After treatment, it is important to follow aftercare instructions given by your doctor. General guidelines include:
- Avoid touching or massaging the treated area for 24 hours
- Refrain from wearing makeup for 12 hours
- Avoid saunas, steam rooms, or vigorous exercise for 48 hours
- Use gentle, fragrance-free skincare for the first week
- Apply broad-spectrum SPF 30+ sunscreen daily
- Contact the clinic if you experience persistent swelling, unusual pain, or other concerns
Under Singapore’s Ministry of Health (MOH) and Healthcare Services Act (HCSA) regulations, specific pricing for aesthetic medical services cannot be displayed online. Pricing will be provided transparently during your consultation, following a clinical assessment of your needs. Please contact us directly or enquire during your appointment.
Injectable HA Moisturizer is made from pure hyaluronic acid with no BDDE chemical cross-linking agents, making it biocompatible. As with all injectable treatments, it should only be administered by a qualified and registered medical professional following a clinical assessment. Be sure to consult an experienced MOH-accredited aesthetic doctor to ensure safe and appropriate outcomes.
Minimal downtime
20-30 minute session